Resin Plant, Polyester Resin Plant, Alkyd Resin Plant, Pva Emulsion Plant Manufacturer, Phenolic Resin Plant Exporter

Alkyd Resin Plant

Alkyd Resin Plant SPECIFICATION:

An alkyd is a polyester modified by the addition of fatty acids and other components. They are derived from polyols and a dicarboxylic acid or carboxylic acid anhydride.

Alkyds are used in paints and in molds for casting. Higher quality higher performance alkyds are produced in the fatty acid process where the composition of the resulting resin can be more precisely controlled. Alkyd coatings are produced in two processes; fatty acid process and the alcoholysis or glyceride process.

They are the dominant resin or "binder" in most commercial "oil-based" coatings.

More economical alkyd resins are produced from the alcoholysis or glyceride process where end product quality control is not as paramount. In this process raw vegetable oil, high in unsaturated component, is combined with additional polyol and heated to cause trans-esterification of the triglycerides into a mixture of mono- and diglyceride oils.

 

We offer our clients a wide range of Alkyd Resin Plants. Based on our vast experience, we have been able to comprehend the minutest needs of our clients. Our constant endeavors to offer our clients with best services and products have been appreciated by our clients and helped us in building a positive brand image. We provide assistance to our clients in making the correct choice based on their budget and attempt to meet their requirements on time. Our professional attitude and valuable and efficient services have helped us garner a wide client.

Alkyd Resin Plant

We offer a wide range of alkyd resin plant, long oil alkyd resin plant etc that is used mainly in the manufacturing of the enamel paints. In our range, we can offer long oil, medium & short oil. The capacities of these plants vary from 1 Ton to 20 ton, batch on solid base. We also have the facility to offer multipurpose oil alkyd resin plant and long oil alkyd resin plant where in the plant can run on solvent process or by fusion process. The heating unit will be high temperature thermic heater.


The finished product of alkyd is double than the solid base 50% solution. If the plant is 5 ton capacity; the finished product will be :


7.5 ton to 10 ton depending on % solid base.

   
 
 
  Products Range
  Horizontal Ribbon Blender
  Large Scale Ribbon Blenders
  U Shaped Ribbon Blender
  W Shaped Ribbon Blender
  Single Shaft Ribbon Blender
  Double Shaft Ribbon Blender
  Pharmaceutical Ribbon Blender
  Ribbon Mixer Machine
  Fertilizer Ribbon Blender
  Detergent Mixing Machine
  Carbon Black Mixing Machine
  Food Powder Mixing Machine
  Ribbon Blender in Africa
  Ribbon Blender in Europe
  Sigma Mixer
  Pigment Paste Sigma Mixer
  Z blades mixer
  Dispersion kneader machine
  Double Sigma Mixer
  Laboratory Sigmna Mixer
  Chewing Gum Sigma Mixer
  Sigma Mixtruder
  ETO Sterilizer
  Cath lab ETO Sterilizer
  ETO STERILIZER
  Horizontal Rectangle Autoclave
  Horizontal Cylindrical Autocalve
  Sliding Door ETO Sterilizer
  100% Pure ETO Gas Cartridge
  4.5 CFT CATH LAB ETO Sterilizer
  Ethylene Oxide Sterilizer
  Pharmaceutical Machienry
  Mass Mixer
  Autoclave
  Octagonal Blender
  Paste Kettle
  Mixing Vessel
  Syrup Manufacturing Plant
  Homoginizer / Emulsifier
  Membrane Filter Holder
  Tea Flavoring & Blending Machine
  Paint Machinery
  Twin Shaft Disperser
  High Speed Disperser
  Ribbon Blender Mixer
  Sigma Mixer
  Ball Mill
  Pug Mill
  Bead Mill
  Chemical Machinery & Equipment
  Reaction Vessel
  Jacketed Reaction Vessel
  Condensor / Heat Exchanger
  Tray Dryer Machine
  Resin Plants
  Pilot Reaction Vessel
  Resin Plants
  Alkyd Resin Plants
  Polyester Resin Plant
  Tray Dryer Machine
  Resin Plants
  Pilot Reaction Vessel
   

Home  |  About Us  |  Products  |   Enquiry  |  Contact Us  |  Sitemap |  Links
© 2017 Ambica Boiler & Fabricator
ETO Sterilizer Manufacturer, Sigma Mixer Machine Manufacturer